Hearth Systems Distributor Buying Guide: Why We Chose the Empire Comfort Systems Gas Fireplace Line and Ductwork
It started on a Tuesday in April 2024, when I was on hold with a freight company, trying to find a pallet of vent pipe. A contractor was waiting for a delivery date, and I already had two suppliers on the other line who couldn't give me the full picture. Somewhere between the elevator music and my third explanation of our PO number, I decided the vendor list needed to change.
I'm not an engineer or a supply chain expert. I'm the office administrator for a 45-person wholesale company in the Midwest. We sell fireplaces, heating equipment, ductwork, and related parts to contractors. I manage roughly $1.4 million in purchase orders a year—maybe $1.7 million in a busy year—across 8 or 9 active vendors. My job is to make sure products arrive, invoices line up, and the people who depend on me don't have to chase down answers.
This isn't one of those polished case studies where every decision looks brilliant in hindsight. It's a story about what happened when we compared our old buying process to a different model, and why Empire Comfort Systems ended up playing a bigger role than I expected.
The Old Way Was Expensive in Ways I Didn't See
When I took over purchasing in 2020, our supplier list was spread out on purpose. We had one source for gas logs, another for vent pipe, one for ductwork, another for air handling, and three separate vendors in the fireplace and wall heater category. On paper, that looked like healthy competition.
In practice, it made the daily work fragile. A typical order for one building could involve two or three manufacturers. Each had a different freight carrier, invoice format, and return policy. None of them had the full scope of what the other was doing. If a delivery arrived short, it could take a week to figure out which supplier was responsible.
In 2022, one of those suppliers sent us an invoice without the PO reference our accounting system needed. Payment got delayed. They paused a shipment. A contractor waiting on parts canceled a small job. The job was only about $3,800, but the cost to our reputation—and to my sanity—was higher. That's when I started tracking things like invoice accuracy and supplier response time, not just unit price.
Our 2024 Vendor Consolidation Project
By spring 2024, the overload was obvious. I asked our operations manager for permission to run a real vendor review. Not the kind where we pull a few quotes and pick the cheapest. The kind where we decide what a good supplier actually does for us.
The goal was simple: consolidate from nine vendors to two or three full-line manufacturers for the core categories. We chose four categories: fireplaces and gas logs, wall heaters, ductwork and air distribution, and replacement parts.
The timing made sense for another reason. Our customers were changing. In 2019, contractors seemed okay ordering a gas fireplace from one company and ductwork from another. By 2024, they wanted fewer coordination points. If we were going to be a systems distributor for them, our manufacturers needed to act like systems partners for us.
What Surprised Me in the Quote Process
Empire Comfort Systems kept coming up in our research. I knew the name from years of seeing their gas space heaters in existing homes. But their full product breadth was bigger than I expected. Gas fireplaces, gas logs, wall heaters, wood stoves, electric fireplaces, ventilation, ductwork, air handling units, thermostats, and replacement parts—that's a lot of product categories to coordinate under one roof.
I put them on the list with two other full-line manufacturers and asked for quotes. That's when I hit the first twist: Empire Comfort Systems wasn't the cheapest quote. Their product price came in maybe 2% or 3% above the low bid. I want to say the exact spread was close to 3%, but I would have to pull the spreadsheet before quoting that number to anyone.
My first instinct was to cross them off. It's what the old playbook told me to do. Instead, I built a small total cost model for the pilot categories. That changed the answer.
Here's what the side-by-side comparison showed. The higher product price disappeared when I added freight, delivery coordination, invoice processing time, replacement part availability, and the cost of chasing down one missing manual. The single full-line order had fewer handoffs. Fewer handoffs meant fewer mistakes.
Everything I had read about full-line suppliers said you give up specialization. For our situation, that conventional wisdom was wrong. We didn't need a specialist who only thought about one appliance; we needed someone who could think about how a gas fireplace, its vent, and the building's ductwork fit together.
The Pilot Order
In August 2024, we placed a pilot order with Empire Comfort Systems. The job needed 24 vented gas fireplaces for a multifamily rehab, plus ductwork and air handling equipment for the mechanical rough-in.
Before we placed it, I asked for current submittal sheets on the Empire Comfort Systems gas fireplace models we planned to stock. The documents matched the units. That sounds basic, but it doesn't always happen.
The pilot wasn't perfect. We had one small freight claim—a cabinet door arrived dented. But the claim was resolved through one phone call, with one PO number, in under a week. I don't think I realized how rare that was until it happened.
The part that sold me, though, was the delivery. The fireplaces, duct pieces, and air handling units arrived on one truck. One bill of lading. One invoice reference. I remember standing in the warehouse and thinking, “Did I order everything?” I actually checked the PO twice.
There is something genuinely satisfying about opening one delivery and seeing everything for one project. After years of juggling separate LTL shipments, it felt like the process was finally on my side.
A Hearth Systems Distributor Buying Guide from the Admin Side
If you're a hearth systems distributor thinking about vendor consolidation, here's the buying guide I wish I had in March 2024. Some of it sounds simple. The hard part is actually using it.
- Compare total acquisition cost, not unit price. Add freight, minimum orders, payment terms, invoice accuracy, and restocking fees. The cheapest vendor on paper was not the cheapest system last year.
- Ask for documentation before you need it. Certification labels, submittal sheets, warranties, and safety data matter. If the paperwork is messy before you buy, it will be worse when you need a permit or an inspection.
- Think about the product line as a system. A gas fireplace is not just an appliance. It needs venting, often combustion air, and sometimes ductwork to distribute heat. A supplier that can coordinate those pieces saves more time than one that only sells the pretty box.
- Check how returns and defect claims work. Who pays freight on a damaged unit? Who issues the credit? What is the response time? One pilot order might not answer that fully, but the conversation tells you a lot.
- Ask about OEM and private label capability. You might not need it today. But if you sell to dealers who want their own brand on certain products, a manufacturer that can handle private-label runs is more flexible than one that can't.
If ductwork is part of your business, give it more weight than I did at first. A ductwork manufacturer may make good rectangular and spiral pipe and still struggle with project-level coordination. A ductwork distributor may stock an excellent inventory but know little about vented fireplace installations. The best option for us was a manufacturer that could also supply ductwork and air handling on the same schedule.
We also asked about fabrication standards. It doesn't make a good blog story, but it protects us on job sites. If a supplier can't talk about why SMACNA duct construction standards matter, that's a red flag for us.
Final Thought: Some Fundamentals Haven't Changed
As of January 2025, we have moved from about nine active suppliers to five. Roughly 60% of our hearth and ductwork product spend now flows through Empire Comfort Systems. We didn't cut every vendor, and we don't need to. What changed is the default.
What was best practice in 2020 doesn't have to be best practice in 2025. The industry has changed. Contractors want systems, not the management burden of five suppliers. Office administrators shouldn't be the ones juggling freight calendars.
The fundamentals haven't changed, though: honesty about lead times, clean invoices, accurate paperwork, and a supplier that answers the phone when something goes wrong. Those qualities matter more than a 2% pricing difference on one component.
If you're a hearth systems distributor tired of managing a vendor list that's too long, look at the full-line manufacturers. Ask the questions above. Run a small pilot. And don't be surprised if the brand that isn't the loudest in the room turns out to be the easiest to work with.