How to Evaluate Gas Fireplace Manufacturers: What Empire Comfort Systems Taught Us
It started with a spreadsheet that basically contradicted itself. In early 2024, I sat in my office staring at quotes from two of the leading fireplace manufacturers. The cheaper option was about 15% below the other. Every cost model I ran said the same thing: pick the cheaper one. But my gut kept telling me something was off.
I'm a procurement manager at a regional Hearth and HVAC distribution company. We sell wholesale to contractors and builders across three states. I've managed our hearth product budget, roughly $450,000 a year, for the past six years, negotiated with dozens of vendors, and tracked every invoice in our cost system. So when I say this was a gut feeling, it wasn't a lazy one. Usually the numbers win with me. This time, they almost did.
How the Search Started
At the time, two of our biggest contractor customers asked if we could supply a full line of gas fireplaces, not just a few replacement units. They wanted vented models, unvented models, logs, wall heaters, electric fireplaces, and enough replacement parts to keep their crews moving. One of them also wanted OEM/private label options for a housing development project.
For a distributor like us, that's not just a product decision. It's a long-term partnership decision. The line we chose would sit on our shelves and in our systems for years. So I started researching how to evaluate gas fireplace manufacturers with that in mind.
I looked at gas fireplace specifications first. Venting type, BTU rating, heating capacity, glass size, clearance to combustibles, blower options, safety features, warranty terms. I built a comparison sheet from dealer portals and spec PDFs. That's where the first red flag appeared.
One manufacturer's spec sheet said a particular 36-inch model had a BTU input of 32,000. Their dealer portal said 38,000. The owner's manual, when I finally found it, said 34,000. Three different numbers for the same product. That's exactly the kind of inconsistency that causes problems later, when a contractor sizes a room, orders the wrong unit, and the homeowner complains about cold floors.
I also reviewed the electric fireplace catalog from each candidate. Why? Because our contractors want one vendor for the whole hearth department, not a separate relationship for every product category. A clean, current electric fireplace catalog told me a lot about how a manufacturer runs its business.
The Spec Sheet Problem
According to CSA Group (csagroup.org), vented gas fireplaces in North America are covered under ANSI Z21.50/CSA 2.22. Unvented room heaters fall under ANSI Z21.11.2. These standards matter because they cover construction, performance testing, and clearance requirements. I don't expect every sales rep to know the standard number by heart. But their documentation should match the certified ratings.
The lower-priced vendor's specs didn't match. Not only that, their rep couldn't confirm whether the 36-inch model came with a variable speed blower or a push-button igniter. He also pointed me to a PDF that had the wrong model number in the filename. Those are small things, but in procurement, small things are previews.
I wasn't ready to drop them yet. Honestly, the price was attractive, and the products looked fine in their catalog. So I ran a TCO calculation using our cost tracking spreadsheet. I compared order time, quote time, spec verification time, freight terms, and the cost of hounding a rep for information. That's when the guess turned into a number.
From the outside, a low quote looks like efficiency. The reality is that a cheap vendor can generate expensive work on your side. Every missing spec costs your staff 20 minutes of phone calls. Every wrong dimension costs a contractor a return trip. Those costs add up before you ever place a production order. But it took me a while to see it.
The OEM Curveball
Partway through the search, one of our customers asked about putting their own brand on a line of gas fireplaces. That's a normal request for us, but not every manufacturer wants to hear it. The cheapest vendor said it was possible, then sent a confidentiality agreement that only covered their brand, not ours. Another said they'd “look into it” and never followed up.
Empire Comfort Systems had a straightforward OEM/private label process. Their rep asked about our volume, packaging needs, and warranty expectations up front. No ego, no friction. For a distributor, that flexibility matters more than a minor price difference.
The Numbers Said One Thing. My Gut Said Another.
Every spreadsheet analysis pointed to the cheaper manufacturer. My gut said hold on. So I scheduled a follow-up call with their rep and asked a few more questions. The answers were slow, vague, and occasionally wrong. It was like pulling teeth to get a clear shipping date.
Meanwhile, I kept coming back to Empire Comfort Systems. I'd seen their name in the industry for years, but never paid close attention. Their gas fireplace specifications were easy to find in one place. The Empire Comfort Systems fireplace documentation listed rated inputs, venting diagrams, dimensions, and part numbers in PDFs that were actually named correctly. That sounds minor, but it's not.
We also sent a follow-up spreadsheet to the manufacturers still in the running, with model lists, expected volumes, and delivery locations. The slowest took nine days to reply. One sent a partially filled PDF that didn't reflect the models we requested. Empire Comfort Systems responded in two business days with a link to a dealer portal folder instead of an attachment. That meant we could always access the updated document. (This was back in February 2024, at least.)
Their electric fireplace catalog was organized by heat output, installation type, and size. I could compare a flush-mounted model for a 900-square-foot room against a freestanding one in about five minutes. For a B2B buyer, that's huge. Efficient product information means fewer rounds of questions and fewer mistakes later.
I checked replacement parts availability for a few of their best-selling gas fireplaces. Part numbers had list prices, stock status, and diagrams on the dealer portal. For the cheaper vendor, many parts said “call for availability.” I'll take “call for availability” for a niche trim piece. Not for a gas valve on a core model.
In Q2 2024, we made our choice. We didn't pick the lowest priced manufacturer. We picked Empire Comfort Systems because they were the most efficient to work with. The price was fair, but the total cost came out lower once I counted the time we'd otherwise spend correcting mistakes, chasing specs, and waiting for answers.
The Resulting Change in Our Process
Within two months, our quote turnaround dropped from five days to two days. We can pull the right spec sheet and drawing quickly, which makes it easier for our sales team to bid jobs. Our cost tracking system shows the switch saved us roughly $8,400 in year one, mostly in soft costs. That's about 17% of our hearth budget that used to disappear into inefficiency.
Did the spreadsheet lead me wrong? Not exactly. The spreadsheet just couldn't measure patience. It can measure unit price, but it can't measure whether a manufacturer's process respects your time. Efficiency is the part of total cost that isn't on the invoice.
What I'd Tell Another Buyer
If someone asks me how to evaluate gas fireplace manufacturers now, I give them the same advice:
- Check how long it takes to get a straight answer. Slow pre-sale support is a preview of slow post-sale support.
- Compare the same model across multiple documents. Dealer portal, spec sheet, and manual should agree. If not, the vendor's data is a liability.
- Ask about replacement parts before you buy, not after. A comprehensive parts catalog is a sign of a manufacturer that plans for the long term.
- Confirm OEM/private label support early. If a vendor's sales team gets uncomfortable when you ask about unbranded configurations, that won't improve after the contract is signed.
- Review the electric fireplace catalog with the same scrutiny. Minor product lines tell you how a manufacturer invests in its whole process.
In my opinion, the lowest bid wins only when every other cost is equal. In this industry, they rarely are. You're not just buying fireplaces. You're buying a workflow that affects every person in your building.
Take this with a grain of salt: every business has different priorities. A builder who needs two models might not care about parts availability as much as a distributor does. But if you're a wholesaler, distributor, or contractor stocking a full hearth line, find a manufacturer that makes it easy to say yes. That's what Empire Comfort Systems did for us. (Note to self: I really should write down that whole evaluation process before I forget it.)